Page 776 of 964 « First < 276 676 726 766 774 775 776 777 778 786 826 876 > Last » Show 40 post(s) from this thread on one page |
R/C Tech Forums(https://www.rctech.net/forum/)
- Electric Off-Road(https://www.rctech.net/forum/electric-off-road-4/)
- - RC10B4/T4 Forum(https://www.rctech.net/forum/electric-off-road/53045-rc10b4-t4-forum.html)
storytyme | 02-26-2010 11:59 PM |
I have a 4600 and 5700kv motors and a 17.5 expressduo2 motor. I have the Tekin RS and the Sidewinder. My T4 is close to being rebuilt so what should I go with??? I will be running on indoor clay.
dirtdustingdavo | 02-27-2010 04:11 AM |
Originally Posted by MCSRacing(Post 7063241)
in my sons T4 he runs a novak ballistic 17.5 .. the gearing calculator calls for a 72/25 .. ya can jog faster than it runs geared like that .. it took a 72/30 to get any speed out of it at all .. and it could still use a tooth or two .. the motor runs on a 5000 40c lipo and after 30 minutes the motor is still cold when it comes off the track.
Give 78/28 a go for the T4
schmidt452 | 02-27-2010 05:30 AM |
I run an non timing boosted esc and use 75/28 or 29. It temps about 135-140 after 5 mins, on the motor I run about 10-15 degrees of timing.
Bobby Z | 02-27-2010 06:42 AM |
does anyone know why the Proline B4 bodies are all discontinued?
Towerhobbies shows the Crowd Pleazer and Vortex as discontinued and they have no buggy bodies on the Proline website now.
alb | 02-27-2010 06:55 AM |
Originally Posted by Bobby Z(Post 7064510)
does anyone know why the Proline B4 bodies are all discontinued?
Towerhobbies shows the Crowd Pleazer and Vortex as discontinued and they have no buggy bodies on the Proline website now.
Bob? is that really you on an off road forum?
not home | 02-27-2010 07:30 AM |
Originally Posted by Bobby Z(Post 7064510)
does anyone know why the Proline B4 bodies are all discontinued?
Towerhobbies shows the Crowd Pleazer and Vortex as discontinued and they have no buggy bodies on the Proline website now.
because jc is better :D
oldandnew | 02-27-2010 08:44 AM |
Originally Posted by oldandnew(Post 7061850)
I would think that the top drivers are using the "light setup" I can only find the blank setup sheets and the stock ones on A&E site. Where can I find set up sheets that explain the "light setup" to me. I am thinking that some of what they are doing might not be good for me only racing about1 1/2 years but I would think it would be a start. Thanks:tire:
I am sorry I forgot to say this is for a factory team T4. Thanks
Bobby Z | 02-27-2010 08:44 AM |
Originally Posted by alb(Post 7064546)
Bob? is that really you on an off road forum?
Yup it is me. Racing offroad at Fastcats since December. Wanted to try Glenwood but racing on Saturdays is difficult
what are you doing these days?
rcman1993 | 02-27-2010 01:15 PM |
Originally Posted by storytyme(Post 7063909)
I have a 4600 and 5700kv motors and a 17.5 expressduo2 motor. I have the Tekin RS and the Sidewinder. My T4 is close to being rebuilt so what should I go with??? I will be running on indoor clay.
Stick with the 17.5 because you can make that thing rip with the tekin rs.
TRU-RC | 02-27-2010 07:32 PM |
Just finished building my B4 and got a teikin rs pro combo w/ a 17.5 what gearing should I run for indoor clay?:confused:
not home | 02-27-2010 07:39 PM |
Originally Posted by TRU-RC(Post 7066860)
Just finished building my B4 and got a teikin rs pro combo w/ a 17.5 what gearing should I run for indoor clay?:confused:
You shouldn't need to go any higher DDR than a 72/33 with a locked slipper. No worries with the locked slipper, a 17.5 can't do damage and you should have plenty of traction
TRU-RC | 02-27-2010 08:29 PM |
1 Attachment(s)
hers a pic. of it all finished up.Attachment 561004:)
not home | 02-27-2010 09:26 PM |
Originally Posted by TRU-RC(Post 7067065)
hers a pic. of it all finished up.Attachment 561004:)
is that brand new? when did you get it?
mini-t12 | 02-27-2010 10:02 PM |
Originally Posted by TRU-RC(Post 7067065)
hers a pic. of it all finished up.Attachment 561004:)
do u race at west coast??
TRU-RC | 02-27-2010 10:37 PM |
Originally Posted by not home(Post 7067273)
is that brand new? when did you get it?
No I got it from a friend and rebuilt it. Its a few years old but it was only driven a few times. I put new arms , chassis, a bunch of hard ware , wheels/tires and a wraped body on it so it looks brand new. It was made in the US and has the older black coated shock shafts with the lighter anodized shock bodies. I raced my buddys at the ROAR race last weekend and had too much fun so I bought this one off my buddy for $50.
All times are GMT -7. It is currently 06:21 AM. | Page 776 of 964 « First < 276 676 726 766 774 775 776 777 778 786 826 876 > Last » Show 40 post(s) from this thread on one page |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.